Glue Dispenser To Make Key Chain 3d Pvc Logo Label Soft Rubber Patch Making Machine With Quality Assurance

Glue Dispenser To Make Key Chain 3d Pvc Logo Label Soft Rubber Patch Making Machine With Quality Assurance

If the liquid has additives or needs to be combined with vacuum defoaming, an electric stirrer should be installed in the material bucket.
When the operability of the liquid is affected by the temperature change, a temperature control system should be installed in the barrel or pipeline.
If the liquid contains quartz powder or other abrasive powder additives, it is recommended to use piston-type volumetric metering products.
If there are additives in the liquid and there is serious precipitation, the gear metering type cannot be used.
The mixing method of the two liquids depends on the proportion and viscosity difference to decide whether to use static or dynamic mixing.
When the viscosity difference between the two liquids A and B is too large or the ratio is above 5:1, a dynamic mixer is required.
For use with automation equipment, please install a high and low liquid level detector.
If the liquid crystallizes, in addition to the rubber storage tank, temperature control must also be installed in the feeding pipeline.
When a large amount of glue is used in daily work, a feeding pump can be used to replace the glue storage bucket.
If there are no air bubbles in the product during the potting process, a vacuum infusion system is required.